Print Page | Close Window

Multiple text lines on single subclass issue

Printed From: PCB Libraries Forum
Category: Libraries
Forum Name: OrCAD PCB
Forum Description:
URL: http://www.PCBLibraries.com/forum/forum_posts.asp?TID=3044
Printed Date: 06 Oct 2022 at 12:25am


Topic: Multiple text lines on single subclass issue
Posted By: rrix
Subject: Multiple text lines on single subclass issue
Date Posted: 07 Feb 2022 at 3:53pm
When I create a footprint from Footprint Expert, it generates the *.dra file okay, but fails when trying to generate the *.psm file.  Here's the error:


Create symbol started.

 
 WARNING(SPMHA1-299): Create symbol multiple text lines are not supported on a single component type subclass. 
    Item=1, Text= 'Dev' Layer= DEVICE TYPE/ASSEMBLY_TOP Location= ( xprobe:xy:0.0000%200.0000" rel="nofollow - )
    Item=2, Text= 'Ref' Layer= DEVICE TYPE/ASSEMBLY_TOP Location= ( xprobe:xy:0.0000%200.0000" rel="nofollow - )

 WARNING(SPMHA1-299): Create symbol multiple text lines are not supported on a single component type subclass. 

ERROR(SPMHA1-291): Create symbol has been aborted.

Is there an option to either turn off creation of one or both of these two text lines; or to change the subclass they go to?




Print Page | Close Window