Vertical Resistor
Printed From: PCB Libraries Forum
Category: General
Forum Name: General Discussion
Forum Description: general topics not related to other forums
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=2341
Printed Date: 31 Oct 2025 at 7:53am
Topic: Vertical Resistor
Posted By: plinder
Subject: Vertical Resistor
Date Posted: 23 May 2018 at 9:04am
Is there a way to calculate the footprint (and especially 3D model) of an axial resistor mounted and bent in a vertical fashion? I see normal axial resistors in the calculator, and radial dipped resistors but not vertical resistors. I'm hoping I'm just missing it.
|
Replies:
Posted By: Tom H
Date Posted: 23 May 2018 at 9:39am
You must create this part in FP Designer as a round body and remove the courtyard because the one hole with distort the courtyard.
The calculation is simple. Place Pin 1 in the center and place Pin 2 2.00 mm away from the component body.
-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn
|
|