Print Page | Close Window

Stencil Aperture Design

Printed From: PCB Libraries Forum
Category: Training / Events
Forum Name: PCB Design Basics
Forum Description:
URL: http://www.PCBLibraries.com/forum/forum_posts.asp?TID=1136
Printed Date: 06 Dec 2022 at 9:13pm


Topic: Stencil Aperture Design
Posted By: hraju
Subject: Stencil Aperture Design
Date Posted: 17 Oct 2013 at 9:49pm
Hi Sir/Madam,
 
I want know detail about stencil aperture design for all type of SMT components.
 
Regards,
Hanumantha Raju



Replies:
Posted By: Tom H
Date Posted: 18 Oct 2013 at 6:59am
You're asking us to put a Paste Mask Stencil book on the forum. To cover every Terminal Lead -
 
 
Here are some basics -
 
 
  
Stencil openings are cut with a laser and normally have rounded corners -
 
 


-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - Twitter - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn


Posted By: CHENONN
Date Posted: 06 Aug 2015 at 6:23pm
Wow, such wonderful answers! Thumbs Up Tom H
 
We can make any stainless stencil for you, just send us your Gerber file.
 
And it's very cheap too.


Posted By: Martijn Kaandorp
Date Posted: 02 Nov 2016 at 8:24am
Aspect ratio is one thing. Area ratio the next.

Checkout this excellent document!

http://documents.indium.com/qdynamo/download.php?docid=645" rel="nofollow - http://documents.indium.com/qdynamo/download.php?docid=645



Print Page | Close Window