Footprint Expert 26.06 Released!!

Fixes & Enhancements:

• Library Editor:
• Problem with batch building a library containing both PADS-To-CAD unique parts and FPE parts mixing up footprint names
• Documents:
• New PCB Footprint Guide - placed in your installation folder /Documents
• To quick access the Guideline select - Help > Important Documents > Footprint Expert Guideline
• Note: these three PDF files come in the current installer; you can delete all others as they are deprecated, updated and/or consolidated into the Guideline:
1. Footprint Expert Guideline 1.41.pdf
2. PCB Design Perfection Starts in the CAD Library.pdf
3. PCBL Footprint Comparison.pdf
• Options:
• Drafting: 
• Courtyard - 'Apply Excess to Body/Pads' changed from Yes/No dropdowns to checkboxes
• Origin - 'Target Diameter' has no effect and was removed (diameter size is automatically derived from crosshair line length)
• Updated the ODA Pad Stack Naming Convention - changed the solder mask default oversize excess from 0.10 to 0.20 mm
• 3D STEP: 
• Fixed 3D model offset problems in TH Headers
• FP Designer:
• Enabled Pad Stack Manager Pad Stack update button for use anytime to update pad stack name
• Updated the Zero Filter pin names when using Reorder Pins feature
• Updated the pad stack properties. The rotation cell value had unnecessary trailing zeros.
• Calculators:
• Corner Concave Oscillator - Courtyard was ignoring Silkscreen when it was wrapped around pins
• Nominal Calculation Mode - SOP/QFP Pitch > 0.50, <= 0.65 was assigned to Pitch > 0.65, <= 0.80
• Added a new Chip Polarized Inductor component family 
• Polarity dot location can be too close to body outline when placed to the side of pin one on some parts  
• Now moved to end of pad if this condition occurs