Naming Convention for PTH Headers

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I found duplicate names in PTH connectors using the Footprint Naming Convention.

The W identifier does not distinguish between circular or square Lead Shape, this create the same footprint name for different connectors; eg, 
HDRV2W65P254_2X1_508X254H945 could have:
- a 0.65mm square lead shape and hole of 1.12mm, or 
- a 0.65mm circular lead shape and hole of 0.85mm

   It would be interesting to specify the Lead Shape in W identifier?

 Thank you very much.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
vgalindo Members Profile Send Private Message Find Members Posts Add to Buddy List New User Joined: 16 Mar 2015 Status: Offline Points: 4	Post Options Post Reply Quote vgalindo Report Post Thanks(0) Quote Reply Topic: Naming Convention for PTH Headers Posted: 30 Apr 2015 at 12:35am
	I found duplicate names in PTH connectors using the Footprint Naming Convention. The W identifier does not distinguish between circular or square Lead Shape, this create the same footprint name for different connectors; eg, HDRV2W65P254_2X1_508X254H945 could have: - a 0.65mm square lead shape and hole of 1.12mm, or - a 0.65mm circular lead shape and hole of 0.85mm It would be interesting to specify the Lead Shape in W identifier? Thank you very much.



Tom H Members Profile Send Private Message Find Members Posts Add to Buddy List Admin Group Joined: 05 Jan 2012 Location: San Diego, CA Status: Offline Points: 5949	Post Options Post Reply Quote Tom H Report Post Thanks(0) Quote Reply Posted: 30 Apr 2015 at 5:13am
	Please start using the new IPC-7351C Footprint Naming Convention for all connectors. MfrName_MfrPartNumber
	Stay connected - follow us! X - LinkedIn

Mattylad Members Profile Send Private Message Find Members Posts Add to Buddy List Advanced User Joined: 02 Jun 2012 Location: Lancashire UK Status: Offline Points: 152	Post Options Post Reply Quote Mattylad Report Post Thanks(0) Quote Reply Posted: 15 May 2015 at 1:15pm
	Has C been released\published yet?

Tom H Members Profile Send Private Message Find Members Posts Add to Buddy List Admin Group Joined: 05 Jan 2012 Location: San Diego, CA Status: Offline Points: 5949	Post Options Post Reply Quote Tom H Report Post Thanks(0) Quote Reply Posted: 15 May 2015 at 1:32pm
	IPC-7351C is deep in development. Our next meeting is Monday morning. It will go out to the entire 1-13 Land Pattern sub-committee next week for review and feedback. It will go through final Executive Committee approval in September at SMTA in Rosemont, IL and then head out for 30-day ballot vote with the 1-13 Land Pattern sub-committee. Then the new Guideline will go into type setting for first article proof and then in February 2016 production should begin. The IPC-7351C Guideline is 90% written but the last 10% will take a couple months and the evaluation and editing / approval phase also takes a couple months. Voting could take 90 days if it doesn't pass on the 1st vote.
	Stay connected - follow us! X - LinkedIn