SOP With Flat Lead
Printed From: PCB Libraries Forum
Category: General
Forum Name: General Discussion
Forum Description: general topics not related to other forums
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=2473
Printed Date: 31 Oct 2025 at 7:44am
Topic: SOP With Flat Lead
Posted By: Batiskaff
Subject: SOP With Flat Lead
Date Posted: 19 Apr 2019 at 6:16am
Just trying to create the footprint for this "exemplar " :https://www.nxp.com/docs/en/package-information/SOT1429-1.pdf" rel="nofollow - https://www.nxp.com/docs/en/package-information/SOT1429-1.pdf I don't know how it will be soldered. Will the leads bended or not? What is the pad length should be? I think Pad Length = (He - E3)/2 + Toe + Heel Any ideas or recommendations for this type of package? |
Replies:
Posted By: Tom H
Date Posted: 19 Apr 2019 at 8:20am
|
That's a big heat sink package. If you're purchasing this part from NXP, you should ask them for their mfr. recommended solder pattern. This large package is outside the scope of any standard package. ------------- Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn |