Fixes & Enhancements:

• Calculators:
• MELF - updated the silkscreen outline
• 2-Pin Side Concave - updated the silkscreen outline
• Mounting Holes - not opening in 'Nominal Calculation Mode'
• PTH Right Angle Headers - silkscreen not trimming around pads
• Surface Mount - Adjusted the origin marker to scale down for Chips smaller than 0402
• Options:
• Terminals - Changed the Gullwing, SO and QFP Pitch Ranges for Least, Nominal and Most
• Old - Pitch > 0.625, <= 0.80, New - Pitch > 0.65, <= 0.80
• Old - Pitch > 0.50, <= 0.625, New - Pitch > 0.50, <= 0.65
• CAD Tool Interfaces:
• Expedition - through-hole tolerance not adjusting to FPE design units
• All - improved the ability to manually type or copy/paste directory paths
• Library Editor:
• Updated and improved the 'Search' feature 
• Updated toolbar icons for:
• Clear Markers
• List by Category
• View Selected Part
• Updated the Datasheet column to only open to a fixed width, but users can open it full
• Fixed typo for right mouse button 'Selected Datasheet'
• Fixed 'Footprint Date' for regional settings